67
3
TEV(EXPOSURE COMPENSATION)
66
This mode can be selected in the “3”
photography mode.
Use this setting when you cannot obtain the
correct brightness, such as when the flash does
not reach the subject (is too faint) or when you
are using the flash for a close-up shot.
●Correction range:5 steps
(–0.6 EV to +0.6 EV in 0.3 EV increments)
See P.126 for more information on EV.
This mode can be selected in the “3”
photography mode.
Use the Brightness setting to obtain the optimum
image brightness (exposure) when the subject is
much brighter or darker than the background.
●Correction range:11 steps
(–1.5 EV to +1.5 EV in 0.3 EV increments).
See P.126 for a information on EV.
●
!
The Brightness setting is disabled in the following
situations:
• When the flash is used in Auto or Red-Eye Reduction
mode.
• When dark scenes are shot in Forced Flash mode.
This mode can be selected in the “3”
photography mode.
Use this setting to soften or emphasize outlines
or to adjust the image quality.
●Three levels of sharpness are available
HARD : Emphasizes the outlines.
Best for shots of subjects such as
buildings or text where you want
sharp images.
NORMAL: Best for ordinary photography.
Provides edge sharpness that is
ideal for ordinary shots.
SOFT : Softens the outlines.
Best for shots of subjects such as
people, where a softer image is
desirable.
●
!
Because the macro and flash settings cannot be
changed once manual focus is set to “ON”, set the
macro (➡P.56) and flash (➡P.52) settings beforehand.
FarNear
Press “d” ( ) to focus on a near subject and
“c” ( ) to focus on a far subject. Use the LCD
monitor to check the focus.
2

WMANUAL FOCUS

PHOTOGRAPHY MENU

S

SHARPNESS
PHOTOGRAPHY MENU

PFLASH(FLASH BRIGHTNESS ADJUSTMENT)

PHOTOGRAPHY MENU PHOTOGRAPHY MENU
TEV(EXPOSURE COMPENSATION)