17
1
LOADING THE BATTERY
16
SETTING UP THE CRADLE
Arrow
mark

➀Hold the battery in, ➁and close the battery

cover.
2
●
!
Do not use excessive force to open the battery
cover.
●
!
When replacing the battery, always switch the
camera off beforehand. If you open the battery cover
without switching the camera off, the camera
settings may revert to the factory defaults.
●
!
See P.101 for information on connecting the cradle
to your PC.
●
!
Problems arising from the use of products other than
genuine FUJIFILM products are not covered by your
warranty.
➀Slide the battery cover out to open it.
➁Insert the battery in the direction indicated by
the arrow “ ” on the battery.
Connect the AC-5V/AC-5VH AC Power Adapter
to the cradle.
AC-5V :U.S.A. and Canada model
AC-5VH:other countries model
Plug the AC-5V/AC-5VH AC Power Adapter into
the main power outlet.
NP-80 rechargeable battery.
●
!
The battery is not fully charged at shipment. You
must charge the battery before you use it.
●
!
See P.112 – 113 for more information on the
battery.

◆Battery Type ◆

DC IN 5V socket
11 2
e
●
➀●
➀
●
➁
●
➁
●
!
The socket-outlet shall be installed near the
equipment and shall be easily accessible.
●
!
The shape of the plug and socket-outlet depends on
the country of use.
Ensure that you push the AC power adapter
plug into the socket.