111110
Notes on Using Your Camera CorrectlyAccessories Guide
●Floppy Disk Adapter (FlashPath)
This adapter is the same size and shape as a 3.5-inches floppy disk. You can copy
the images on a SmartMedia to your PC simply by loading the SmartMedia into the
floppy disk adapter and then inserting the adapter into your floppy disk drive.
●SM-R2 Image Memory Card Reader
The SM-R2 allows images to very easily be read to and written from an image
memory card (SmartMedia) to a personal computer. Its USB interface provides
high-speed data transmission.
●
Windows 98/98SE, Windows Me, Windows 2000 Professional or iMac and models
that support USB as standard.
●DM-R1 Image Memory Card Reader
This device provides a simple way to transfer image data in either direction
between your PC and an image memory card (SmartMedia or CompactFlash
Type II (Microdrive-compatible)).
The IEEE 1394 interface provides high-speed data transfer.
●
Windows 98 Second Edition, Windows 2000 Professional (read-only), iMacDV and
Power Macintosh PCs with FireWire as a standard feature. Mac OS 8.5.1 to 9.0
Compatible OS Compatible SmartMedia
Windows 95/98/98SE/Me/NT4.0
MacOS 7.6.1 to 9.1 5V/3.3V, 2MB to 128MBFD-A2
■Places to Avoid
Do not store or use the camera in the following types of
locations :
●Very humid, dirty or dusty places.
●In direct sunlight or in places subject to extreme
temperature rises, such as in a closed car in summer.
●Extremely cold places.
●Places subject to strong vibrations.
●Places affected by smoke or steam.
●Places subject to strong magnetic fields (such as
places near motors, transformers or magnets).
●In contact with chemicals such as pesticides or next
to rubber or vinyl products for long periods of time.
■Do not expose the camera to sand
The FinePix4800 ZOOM is particularly and adversely
affected by sand. In sandy locations such as beaches
or deserts, or in locations where there is wind borne
sand, ensure that the camera is not exposed to sand.
This can cause faults that may be irreparable.
■Notes on Condensation
If the camera is carried suddenly from a cold location
into a warm place, water droplets (condensation) may
form on the inside of the camera or on the lens. When
this occurs, switch the camera off and wait an hour
before using the camera. Condensation may also form
on the SmartMedia card. In this event, remove the
SmartMedia and wait a short time before using it again.
■
When the Camera is Unused for Long Periods
If you do not intend to use the camera for a long period
of time, remove the batteries and the SmartMedia card
before storing the camera.
■Cleaning Your Camera
●Use a blower brush to remove dust from the lens and
LCD surface and then wipe lightly with a soft, dry
cloth. If any soiling remains, apply a small amount of
lens cleaning liquid to a piece of FUJIFILM lens
cleaning paper and wipe gently.
●Do not scratch hard objects against the lens, LCD
monitor screen or viewfinder as these surfaces are
easily damaged.
●Clean the body of the camera with a soft dry cloth. Do
not use volatile substances such as thinners, benzine
or insecticide, as these may react with camera body
and cause deformation or remove the coating.
■Using the Camera Overseas
When travelling overseas, do not place your camera in
the check-in baggage. Baggage handling at airports
may subject baggage to violent shocks, and the camera
may be damaged internally even when no external
damage is visible.
eBe sure to read this information in conjunction with “Safety Notes” (➡P.127) to ensure that you use
your camera correctly.
●SC-FX8