ZShooting

Matters

Problems

Possible causes

Solutions

Page

 

 

The shutter button was pressed while the

Wait until the charging is completed before

44

 

 

flash was charging.

pressing the shutter button.

 

 

 

 

Cannot use the

 

 

 

 

The Shooting mode is set to ,.

Change the Shooting mode.

40

 

flash.

 

 

 

 

 

 

The batteries have run out.

Load new or fully charged batteries.

15,

 

 

 

 

17, 99

 

 

 

 

 

Flash

The flash settings

The Shooting mode is set to a, ,, .,

The flash settings are restricted because

 

are restricted and

or 8.

the camera settings are tailored to the

 

 

40

 

cannot be

 

scene being shot. Change the Shooting

 

 

 

 

selected.

 

mode for a wider range of flash settings.

 

 

 

 

 

 

 

The playback

The subject is too far away.

Move to within the effective flash range

42, 44

 

image is dark

 

before taking the picture.

 

 

 

 

even though the

 

 

 

 

Your finger was covering the flash.

Hold the camera correctly.

26, 29

 

flash was used.

 

 

 

 

 

 

 

The lens is dirty.

Clean the lens.

98

 

 

 

 

 

 

 

{appeared when taking pictures.

Check the focus on the subject and take

27,

 

The image is

 

pictures.

30,

 

blurred.

 

 

105

Photographed images

 

 

 

 

 

appeared when taking pictures.

It may cause camera shake. Hold the

28,

 

 

 

 

 

camera steadily.

105

 

 

 

 

 

 

There is speckling

The picture was taken with a slow shutter

This is a characteristic of CCDs and does

 

 

speed (long exposure) in a high-

not indicate a camera fault.

 

on the image.

temperature environment.

 

 

 

 

 

 

 

 

 

 

 

 

 

AC power adapter was connected or

Connect or disconnect the AC power

 

 

Photographed

disconnected during turning the camera

adapter only when the camera is off.

90,

Recording images

images or movies

on.

Failing to turn the camera off first can

101

 

are not recorded.

 

result in damage to the xD-Picture Card

 

 

 

 

 

 

or malfunctions during PC connection.

 

 

 

 

 

 

Troubleshooting

111

Continued