Matters

Problems

Possible causes

Solutions

Page

 

 

The USB cable (mini-B) is not correctly

Set up the camera, and connect the USB

90

 

 

connected to the PC or camera.

cable (mini-B) correctly.

 

 

 

 

 

 

 

 

 

 

<PICTBRIDGE is selected in

Perform the below steps to cancel the

 

 

 

LUSB MODE in the SET-UP menu.

setting before selecting @DSC.

 

 

 

 

• Windows

 

 

 

 

AThe “New Hardware Found” wizard or

 

 

PC does not

 

“Scanner and Camera” wizard appears.

 

 

 

If the wizard does not appear, proceed

 

Connecting to PC

recognize the

 

 

 

to step C.

 

 

camera.

 

 

 

 

BClick the [Cancel] button.

90

 

 

 

 

 

 

CDisconnect the camera from the PC.

 

 

 

 

• Macintosh

 

 

 

 

AThe window for locating the driver appears.

 

 

 

 

If the window does not appear, proceed

 

 

 

 

to step C.

 

 

 

 

BClick the [Cancel] button.

 

 

 

 

C Disconnect the camera from the Macintosh.

 

 

 

 

 

 

Connecting to

Cannot print with

@DSC is selected in LUSB MODE

Select <PICTBRIDGE.

79

printer

PictBridge.

in the SET-UP menu.

 

 

 

 

 

 

 

 

ZOthers

 

 

 

 

 

 

 

 

 

Matters

Problems

Possible causes

Solutions

Page

 

 

Camera malfunction may be caused

Briefly remove the batteries or disconnect

15,

 

Nothing happens

temporarily.

the AC power adapter. Then reload the

16,

 

 

batteries or reconnect the AC power

78,

 

when pressing the

 

 

 

adapter and try again.

101

 

buttons on the

 

 

 

 

 

Camera operation

camera.

The batteries have run out.

Load new or fully charged batteries.

15,

 

 

 

 

17, 99

etc.

 

 

 

 

 

 

 

 

 

Camera malfunction may be caused

Briefly remove the batteries or disconnect

15,

 

The camera no

temporarily.

the AC power adapter. Then reload the

 

16,

 

longer works

 

batteries or reconnect the AC power adapter

 

 

78,

 

correctly.

 

and try again. If you think the camera is

 

 

101

 

 

 

faulty, contact your FUJIFILM dealer.

 

 

 

 

 

 

 

 

 

Troubleshooting

113