Special Features and Important Information

Waterproof, Dustproof, Shock Resistant Performance

The camera’s waterproof and dustproof performance is equivalent to IP68.

This camera has passed our in-house drop test (1 m [3 ft. 3 in.] fall onto a 5 cm [1.5 in.] thick plywood surface) in accordance with MIL-

Standard 810F Method 516.5-Shock.

*Test conditions determined in-house. Does not guarantee the product to be free of the risks of damage, malfunction, or water damage in all conditions.

*The supplied accessories are not waterproof.

What You Should Remember Before Using the Camera

A sheet of protective glass is located at the front of the lens. Clear photos will not be possible if this glass is dirty; always keep the protective glass clean.

Make sure to close the battery-chamber cover securely. If water, dirt or sand gets inside the camera, malfunction may result.

Do not open or close the battery-chamber cover on/by the sea, a lake or similar locations. Similarly, do not open or close the cover with wet hands.

vi

Before changing your battery or memory card, make sure that the camera and your hands are completely dry.

The camera sinks in water. Attach the supplied strap, and keep the strap around your wrist while using the camera.

What You Should Remember When Using the Camera

Do not use the camera in water 3 meters (9.8 feet) or deeper.

Do not use the camera in water for more than 2 hours consecutively.

Do not open or close the battery-chamber cover in water.

Do not use the camera in hot water, for example in a hot spring bath.

Do not apply excessive force to the camera. The camera may be damaged if you dive into water with it, for example.

Do not leave the camera on sand. Not only can sand get into the speaker and microphone, but it can become extremely hot if it is exposed to direct sunlight, exceeding the camera’s approved operating temperature.