INSTALLATION (continued)

3 Disconnect the wire connector between the push switch assembly and wire box, then detach the front cover by disengaging its hinge part.

NOTE

Be careful not to damage the hinge part.

2

1

4 Align 4 screw holes of the liner and range hood unit, then fix securely using the supplied screws (M5⋅30) and nuts.

NOTE

Fasten all screws and nuts evenly.

5 Make the duct joint secure and air tight using non-flammable tape such as duct tape, etc. (not supplied)

NOTE

Make sure that the shutter installed in the exhaust pipe moves freely.

10