INSTALLATION (continued)

In case of Horizontal Discharge

(1) Referring to Fig. at right, provide a rectangular hole in the wall for passing through the exhaust pipe.

(2) Remove the exhaust pipe from the top of the range hood.

NOTE

Keep 4 screws (M48) for fixing the exhaust pipe later.

(3)Detach the cover plate by removing 2 fixing screws, and attach it as shown in Fig.

(4)Attach the range hood to the liner. Refer to page 9 for details.

(5) Connect the exhaust pipe with the duct, then make the duct joint secure and air tight using non-flammable tape such as duct tape, etc. (not supplied)

(6) Attach the exhaust pipe to the range hood with 4 screws (M48), from out side of the wall.

(7) Connect the duct to out side wall cap. (not supplied)

CAUTION

To prevent air or moisture from entering through the wall opening, be sure to install wall insulation to seal around duct work completely.

8