INSTALLATION (continued)

3. CONNECTING POWER SUPPLY WIRES

WARNING

•

•

1

Electrical wiring should be done by a qualified person(s) in accordance with all- applicable codes and standards, including fire-rated construction. An unqualified person doing the work could result in fire, electric shock or injury.

This range hood uses 120V AC. Do not connect to other voltage since fire, electric shock or damage could result.

Remove the nut from the conduit connector at the end of power wiring.

WARNING

Be sure to switch power OFF at service panel before wiring.

2 Remove one screw fixing the wire cover and detach it.

3 Connect the conduit through the connecting hole

of the body using the nut previously removed.

11