INSTALLATION (continued)

4. FINAL ASSEMBLY AND CHECK

One 40 W light bulb (not supplied) can be mounted to this range hood.

Prior to final assembly, install a light bulb (ordinary type, in the base diameter 17 mm), rated 120 V-40 W or below.

1 Assembly

(1) Hang the front cover on the hinge part.

(2) Connect the wire connector and replace the front cover with 4 screws.

CAUTION

•To prevent the screw holes from being damaged, be sure to tighten the screws with the torque of 13 inch-lbs. (1.5 N-m) or less.

•Be sure to connect the wire connector rightly. Otherwise, the range hood won’t work properly.

2 Check

(1) Turn on the electrical circuit to the range hood.

(2) Make sure that the switch and light operate correctly. Refer to page 4 of the Operation Manual.

(3) Check the ventilating functions at Hi, Me and Lo positions.

(4) Make sure that the range hood has no abnormal noises and/or vibration.

CAUTION

•To reduce the risk of injury, keep your hands and other objects away from the fan while it is in motion.

•Wear working gloves to avoid injury.

13