Fujitsu 1300U2 2-2 4 Connecting the MO Drive to Your Computer, Check the Device Manager

2-24 Connecting the MO Drive to Your Computer

1. Connect the USB cable (mini-B connector) to the USB port on the MO drive.

2. Connect the USB cable (A-type connector) to the USB port on your computer.

Check that the MO Drive is connected correctly

1. Open [My Computer].

*In Windows XP, select [My Computer] from the [Start] menu.

2.If a removable disk icon appears, the MO drive has been recognized successfully.

*If there is no [Removable Disk] icon, disconnect the USB cable from your computer, wait a few moments and then reconnect it. If the icon still does not appear, refer to the “Troubleshooting” section.

Windows 2000 Windows XP

Note

Once the drivers for this product are successfully installed, the devices listed below are added to the [Device Manager] window.

Check the Device Manager

●In Windows 2000

Right-click the [My Computer] icon, click [Properties], click the [Hardware] tab and then click [Device Manager] to open the Device Manager window.

●In Windows XP

From the [Start] menu, right-click [My Computer], click [Properties], click the [Hardware] tab and then click [Device Manager] to open the Device Manager window.

OS	Added Location	Added Device Name
	USB (Universal Serial Bus)	USB High Capacity Storage Device
Windows 2000/	Controllers
Windows XP	Disk Drives	FUJITSU MCS3130UB-S USB Device
	Storage Area Volume	General-purpose Volume

18