Fujitsu 1300U2 user manual Windows 98 including Second Edition

Windows 98 (including Second Edition)

Question

Q6.

I connected the MO, but the icon doesn’t appear in [My Computer].

Check

1.Is the cable connected? Is the MO drive’s power/access light lit?

2.Open [My computer] > [Control Panel] > [System] > [Device Manager] tab. Are [Universal Serial Bus Controller] and [USB MO Storage Class Driver] displayed?

Solution

1-1 Check that the USB cable is correctly connected.

1-2 If you connected the drive while Windows 98 was not running, or was in Standby or Suspended mode, restore Windows 98 and then connect the USB cable.

1-3 Briefly disconnect and then reconnect the USB cable. If your PC still does not recognize the MO drive, disconnect the cable again, restart Windows 98 and then connect the USB cable.

2The utility software may not be properly installed or Windows 98 may not be recognizing the MO drive correctly. Use the following procedures to erase the USB information and then reinstall the utility software.

1)Click [System] in [Control Panel] in the [My Computer] window and then open [Device Manager] in [System Properties].

2)Delete [USB MO Storage Class Driver] in [Universal Serial Bus Controller] or delete [USB Magneto-Optical Device] (may display as [USB Device]) in [Other Devices].

3)Disconnect the USB cable for the USB MO drive.

4)Refer to page 43 and uninstall the USB MO Storage Class Driver and TPP Storage Driver Installation.

5)Restart Windows 98.

6)Refer to page 21 and reinstall the utility software.

62