Fujitsu 1300U2 user manual Cautions, computer

Models: 1300U2

1 70
Download 70 pages 20.08 Kb
Page 8
Image 8
Cautions

Cautions

Avoid sources of strong magnetic fields and electrical signals.

Keep this device away from magnets or other objects that generate a magnetic field and away from wireless equipment or other devices that emit electrical signals as such equipment could cause this device to malfunction.

Do not drop or bump the device.

Dropping or bumping the device during operation or transportation could result in strong shocks or vibrations that could cause faults or damage.

Remove the MO disk

Do not move the device while it is operating or while an MO disk is inserted in the

before moving the

device as this could damage the MO disk. When moving the device, be sure to

device.

remove the MO disk first.

 

 

Avoid equipment that is

Because the use of this device in close proximity to a radio or television receiver

could disrupt signal reception, it should not be set up close to such equipment. It

sensitive to electrical

should also be kept away from other devices that are sensitive to electrical signals

signals.

as it could cause such devices to malfunction.

 

 

 

Install the device

Take care not to install the device in locations affected by strong vibrations or large

amounts of dust or in locations where chemicals are sprayed as this could result in

appropriately.

device faults.

 

 

 

Do not use in conditions or places where there are extremes of temperature or humidity.

Do not use this device in locations subject to extremely high (or low) temperatures, in very humid locations, in direct sunlight or near heating appliances (heaters, cooking appliances, etc.) as this could cause device faults. Note also that because sudden changes in temperature can result in condensation-related faults, allow the ambient temperature to stabilize before using the device.

Do not operate the device during MO disk read/write operations.

Because it uses a cache write function, this device continues to operate even after writing has finished on the computer. Do not switch the device off or eject the disk while the access light is flashing as this could result in device damage or faults, or physical damage to the MO disk and/or the data on the disk.

 

Unanticipated malfunctions or damage occurring during an MO disk read/write

 

operation can cause the data on the MO disk and/or the data that was being

Back up your data.

read/written to be unrecoverable. The data involved should be backed up

 

beforehand as a precautionary measure. Also, be sure to write-protect MO disks

 

containing important data and programs.

 

 

Do not place objects

Do not place objects on top of this device as this could scratch or damage the

on the device.

device.

Do not insert objects (other than MO disks) into the device.

Do not put anything (floppy disks, etc.) other than MO disks into the slot as this may cause damage or a fault.

Handle MO disks

Eject the MO disk before connecting or disconnecting the MO drive from your

carefully.

computer.

 

 

5

Page 8
Image 8
Fujitsu 1300U2 user manual Cautions, computer