Fujitsu 15C user manual ADF Output Tray Figure, 5 Install the ADF Output Paper Tray

2.4	ADF Output Tray (Figure 2-5)
i).	Hold the output paper rack some 30 degrees aslant as shown in Figure 2-5.
ii).	Insert the three protrusions on the output paper tray to the three slots on the ADF.

iii). Release the paper tray gently. Make sure the tray is firmly attached to the ADF. iv). Pull out the output paper tray extension wire to the desired length.

Protrusions

Figure 2-5 Install the ADF Output Paper Tray

2-6