Manuals
/
Fujitsu
/
Computer Equipment
/
Scanner
Fujitsu
15C user manual 3 Adjusting the SCSI ID setting, SCSI ID Selector
Models:
15C
1
8
23
23
Download
23 pages
2 Kb
5
6
7
8
9
10
11
12
<
>
Troubleshooting
Specifications
Install
Maintenance
Connecting the Cable i. Turning the Power Off
Cleaning the Glass The procedures
3 Adjusting the SCSI ID setting
Page 8
Image 8
SCSI ID Selector
Figure
2-3
Adjusting the SCSI ID setting.
2-4
Page 7
Page 9
Page 8
Image 8
Page 7
Page 9
Contents
Scanpartner 15C
Image Scanner
Table of Contents
1. INTRODUCTION
Figure 1-1 Scanner packing
Output Paper Rack
2. INSTALLATION AND CONNECTIONS
Precautions
2.1 Shipping Bracket
2.1.1 Removing the Shipping Bracket refer to figures 2-1 and
Figure 2-1 Removing the Shipping Bracket
Figure 2-2 Securing the Shipping Bracket
2.1.2 Refitting the Shipping Bracket
2.2 SCSI Interface Device ID
Figure 2-3 Adjusting the SCSI ID setting
SCSI ID Selector
2.3 ADF Paper Chute Figure
Hold the output paper rack some 30 degrees aslant as shown in Figure
Figure 2-5 Install the ADF Output Paper Tray
ADF Output Tray Figure
2.5 Document Loading
For flatbed scanning
i. Place the document to be scanned onto the document glass face down
Figure 2-6- Place Document on the Scanner
2.6 ADF Scanning
iii. SCSI Termination
2.7 Connecting the Cable i. Turning the Power Off
ii. Turning the Power On
SCSI Cable
Figure 2-8 Scanpartner 15C Scanner Cable Connection
Figure 2-9 Scanpartner 15C SCSI Scanner Cable Connections with Mac
3. MAINTENANCE
3.1 Cleaning the ADF
Figure 3-1 Opening the ADF unit and Document Cover
i. Soak a cotton swab with some isoprophy alcohol 95%
3.2 Cleaning the Glass The procedures
Figure 3-2 The Cleaning Area
4. TROUBLESHOOTING
4.1 Question and Answer
Question Paper becomes skewed in the Scanner
4.2 Paper Jam in the ADF
Figure 4.2 ADF Paper Jam - Removing the Paper
The following can not be properly fed by ADF
5. SPECIFICATIONS
All specifications are subject to change without notice
5.1 Scanpartner 15C Specifications