Fujitsu 9319356051 Operation, En-7, Press the MODE button to select the desired mode

Models: 9319356051 AIR CONDITIONER

1 24
Download 24 pages 41.97 Kb
Page 7
Image 7
OPERATION

OPERATION

To Start Operation

Press the START/STOP button Press the MODE button  to select the desired mode..

The indoor unit’s OPERATION Indicator Lamp (green) will light.

The air conditioner will start operating.

To Select Mode Operation

Press the MODE button ●Temperature setting range: to select the desired mode.

Each time the button is pressed, the mode will change in the following order.

 

AUTO

 

COOL

 

DRY

 

 

 

 

 

 

 

 

 

 

 

HEAT

 

FAN

 

 

 

 

About 3 seconds later, the entire display will reappear.

To Set the Temperature

Press the TEMP. button En-7Manual background.

Manual background button: Press to raise the temperature settings. Manual background button: Press to lower the temperature settings.

Temperature setting range:

AUTO

64–88 °F

COOL/DRY

64–88 °F

HEAT

60–88 °F

The temperature cannot be used to set room temperature during the FAN mode (the temperature will not appear on the Remote Controller's Display).

About 3 seconds later, the entire display will reappear.

The temperature setting should be considered a standard value, and may differ somewhat from the actual room temperature.

Example: When set to COOL.

Example: When set to 78 °F.

To Set the Fan Speed

Press the FAN button

.

Each time the button is pressed, the fan speed changes in the following order:

(AUTO) (HIGH) (MED) (LOW) (QUIET)

About 3 seconds later, the entire display will reappear.

When set to AUTO:

Heating:

Fan operates so as to optimally circulate warmed air.

 

 

However, the fan will operate at very low speed when the temperature of

Cooling:

the air issued from the indoor unit is low.

As the room temperature approaches that of the temperature setting, the Example: When set to AUTO.

 

 

fan speed becomes slower.

 

 

When the room temperature is close to the set temperature, the inner

Fan

:

room fan may occasionally stop, in order to save energy.

The fan runs at the MED fan speed.

SUPER QUIET Operation

SUPER QUIET operation begins. The indoor unit’s airflow will be reduced for quieter operation.

SUPER QUIET operation cannot be used during DRY mode. (The same is true when dry mode is selected during AUTO mode operation.)

During SUPER QUIET operation, Heating and Cooling performance will be reduced somewhat. If the room does not warm up/cool down when using SUPER QUIET Op- eration, please adjust the indoor unit’s Fan Speed.

En-7

Page 7
Image 7
Fujitsu 9319356051 Operation, En-7, Press the MODE button to select the desired mode, Temperature setting range