CLEANING THE ELECTRONIC AIR CLEAN UNIT

WARNING!

CAUTION!

Before cleaning the dust collection unit, be sure to turn off the power supply to the air conditioner. Electric shock may result.

●Make sure the dust collection unit is properly mounted before cleaning or performing other tasks on it. If the unit is not properly mounted, it could fall off and cause damage or injury.

●You can be injured if you touch the heat exchanger when removing or installing the dust collec- tion unit. Do not insert your fingers between the dust collection unit and the heat exchanger.

The display section for the air clean indicator will flash when it is time for the periodic cleaning of the dust collection unit.

•When the flashing of the display section for the air clean indicator is slow (approximately 1 flash every 7 seconds)

This will flash after approximately 400 hours of operation. Cleaning of the dust collection unit as soon as possible is recommended.

•When the flashing of the display section for the air clean indicator is fast (approximately 1 flash every 3 seconds)

This will flash after approximately 500 hours of operation. Stop the air cleaning operation and clean the dust collection unit.

●As a guideline, clean every 6 months.

●If unusual sounds like the rushing of air or popping are heard, clean the dust collection unit as quickly as possible.

●If the air cleaning check function is operating, open the intake grille and press the MANUAL AUTO button.

Removing the dust collection unit

1.Use the remote controller to stop opera- tion and turn off the power supply.

2.Open the right side intake grille and re- move the air filter. (Refer to page 13.)

3.Remove the dust collection unit.

A

Grasp the handle of the dust collection unit. Pull up to remove (shown as direction A).

Cleaning the dust collection unit

Wash with water and dry.

1Soak the dust collection unit in warm water (100 to 115 °F) for 10 to 15 minutes. If the dust collection unit is extremely dirty, extremely dilute a mild synthetic laundry detergent (low alkalinity or isotope detergent) to 15 times the standard concentration and allow the

dust collection unit to soak in it.

2Gently move up and down and to the right and left. A soft sponge can also be used to wipe the rear sur- face.

3Rinse with clean water.

4Shake the dust collection unit to drain off the water. (If the dust collection unit is extremely dirty, repeat

Steps 1 through 4 two or three more times.)

5Place the dust collection unit in the shade and allow it to dry completely.

●Only use a mild synthetic laundry detergent (low alka- linity or isotope detergent).

●Never disassemble the dust collection unit.

●Never soak the dust collection unit in hot water.

●Never wipe the dust collection unit with a scrub brush or other hard or abrasive items. This will damage the honey comb filter.

●Never insert a brush into the inside of dust collection unit for washing. This will damage the internal parts and cause malfunctioning of the air cleaning unit.

●Never use dryer or other device to blow hot air on the dust collection unit. This will cause deformation or other damage.

14

Page 14 Page 16
Page 15
Image 15
Fujitsu AOU24CXQ, AWU24RXQ, AWU18RXQ, AWU24CXQ Cleaning the Electronic AIR Clean Unit, Removing the dust collection unit
Page 14 Page 16

AWU24RXQ, AOU24RXQ, AWU18RXQ, AWU18CXQ, Room Air Conditioner - Wall Mounted specifications

The Fujitsu AWU24CXQ, AWU18RXQ, AOU18RXQ, AWU24RXQ, and AOU24RXQ series of air conditioning units are designed to provide efficient cooling and heating solutions for various residential and commercial environments. Fujitsu is renowned for its innovative technology and reliability, which is evident in these models.

One of the main features of these units is their inverter technology. This technology enables the compressor to adjust its speed based on the room's temperature, offering significant energy savings compared to traditional units. By operating more efficiently, these air conditioners reduce electricity bills while maintaining a comfortable indoor climate.

The AWU24CXQ and AWU24RXQ models boast a higher cooling capacity, making them suitable for larger spaces. Their robust design ensures effective performance even during extreme temperatures. In contrast, the AWU18RXQ and AOU18RXQ are ideal for medium-sized rooms, striking a balance between power and efficiency.

Another notable characteristic is the quiet operation of these models. With low noise levels, they create a peaceful environment, perfect for use in bedrooms, offices, and libraries. The outer units, such as the AOU18RXQ and AOU24RXQ, are engineered for durability and resilience, ensuring they perform well in various weather conditions.

All models feature advanced air filtration systems, which help in removing dust, pollen, and other allergens from the air. This is particularly beneficial for individuals suffering from respiratory issues or allergies, as the units contribute to a healthier indoor environment.

Additionally, the Fujitsu units come equipped with user-friendly remote controls, allowing users to easily adjust settings such as temperature and fan speed. Some models also support smart technology integration, enabling users to control them through various mobile applications and smart home devices.

Installation flexibility is another advantage, as these air conditioners can be adapted to a variety of configurations, whether wall-mounted, ceiling-mounted, or free-standing.

Overall, the Fujitsu AWU24CXQ, AWU18RXQ, AOU18RXQ, AWU24RXQ, and AOU24RXQ models exemplify a combination of performance, efficiency, and advanced technology, making them excellent choices for anyone seeking reliable climate control solutions. Their commitment to sustainability and user comfort ensures they remain popular among consumers and businesses alike.
Top Page Image Contents