Fig. 1 Indoor Unit
1Operating Control Panel (Fig. 2)
2 MANUAL AUTO button
3Remote Control Signal Receiver
4Indicator Lamps (Fig. 3)
5OPERATION Indicator Lamp
(green | COOL, DRY, FAN) |
(red | *HEAT) |
6TIMER Indicator Lamp (yellow)
7 SWING Indicator Lamp (orange)
(VERTICAL/HORIZONTAL SWING)
8 AIR CLEAN Indicator Lamp (green)
●If the TIMER indicator lamp flashes when the timer is operating, it indicates that a fault has occurred with the timer setting (See page 19 Auto Restart).
9Intake Filter (Fig. 4)
;UP/DOWN Air Direction Flaps
ARIGHT/LEFT Air Direction Louvers
(behind UP/DOWN Air Direction Flaps)
BDrain Hose
CElectronic Air Clean Unit (Fig. 4)
Fig. 5 Outdoor Unit
DIntake Port E Outlet Port F Pipe Unit
Fig. 6 Remote Control Unit 
GAIR CLEAN button
HMASTER CONTROL button
ISET TEMP./SET TIME buttons (
) J Signal Transmitter
K TIMER button
L FAN CONTROL button M START/STOP button
N AIR FLOW DIRECTION
VERTICAL SET button
O AIR FLOW DIRECTION
VERTICAL SWING button
P AIR FLOW DIRECTION
HORIZONTAL SET button
Q AIR FLOW DIRECTION
HORIZONTAL SWING button R TIME ADJUST button
S ACL button
Rear side (Fig. 7)
TTEST RUN
●Touch the two metal contacts with a me- tallic object to send the signal to perform a test run.
●Perform a test run only when installing the air conditioner. If the signal to perform a test run is received during normal opera- tion, the air conditioner’s thermostat will malfunction.
●If the signal to perform a test run is re- ceived during normal operation, the unit will switch to the test operation mode and the indoor unit’s OPERATION and TIMER indicator lamps will flash simultaneously.
●To stop the test operation mode, press the START/STOP button to stop the air condi- tioner.
URemote Control Unit Display (Fig. 8) V Transmit Indicator
W Clock Display
X Operating Mode Display Y T imer Mode Display Z Fan Speed Display
[ Temperature Set Display \ T imer Set Indicator
] Temperature Set Indicator
4
