![Mounting the dust collection unit](/images/new-backgrounds/49387/4938731x1.webp)
CLEANING THE ELECTRONIC AIR CLEAN UNIT
WARNING!
CAUTION!
Before cleaning the dust collection unit, be sure to turn off the power supply to the air conditioner. Electric shock may result.
●Make sure the dust collection unit is properly mounted before cleaning or performing other tasks on it. If the unit is not properly mounted, it could fall off and cause damage or injury.
●You can be injured if you touch the heat exchanger when removing or installing the dust collec- tion unit. Do not insert your fingers between the dust collection unit and the heat exchanger.
Mounting the dust collection unit |
|
1. Mount the dust collection unit. | 2. Install the intake filter. (Refer to page 13.) |
● If the lamps flash after cleaning the dust collection unit, check if the dust collection unit is wet and if the intake filters are closed tightly.
● If the dust collection unit is completely dry and the in- take filters are installed tightly but the lamps still flash quickly, see TROUBLESHOOTING (Page 17).
1Slide the dust collection unit onto the guide rails of the electronic air clean filter.
Guide rail
2Slide the dust collection unit until the projections (2 locations) on the guide rails “click.”
Projections (2 locations)
Click
Click
●Make sure the dust collection unit is completely dry before mounting it.
●After the dust collection unit has been mounted into place, make sure that the dust collection unit is securely inserted in the frame. If the dust collection unit is not properly mounted, the air cleaning operation will stop.
15