Operation
Activate/deactivate ECO operating mode
The power consumption of the device can be decreased by reducing the brightness of the picture.
►Press the Forwards / ECO button to switch the ECO operating mode on or off. The message ECO on / off is displayed.
If the ECO operating mode is activated, the following OSD settings are changed:
Colour6500K temperature
Brightnessreduced
After the ECO operating mode is switched off, the brightness previously set by the user is restored.
Locking the OSD menu
The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings.
►Press and keep the SELECT/MENU button pressed for a few seconds while you switch on the monitor with the ON/OFF switch.
The message OSD locked / unlocked is displayed.
Proceed in the same way to release the locked OSD menu again.
Locking the ON/OFF button
The ON/OFF switch can be locked to prevent accidental or unauthorised changes to the monitor settings.
►Press the Forwards / ECO button and the Back / time and keep them pressed for a few seconds.
INPUT
button at the same
The message Power button locked / unlocked is displayed.
Proceed in the same way to release the locked ON/OFF switch again.
Changing the monitor settings using the OSD menu
With the buttons on the control panel, you can call up and use the integrated OSD
17 |
