Operation
If you wish to change other settings, select the corresponding function from the OSD main menu. All possible adjustments of the main menu are described below.
OSD menu functions
The OSD menu for analogue monitor operation is described below. During digital operation some functions are not available, they are not needed because of the digital transmission technology being used.
Adjusting the brightness and contrast
| Call up the Brightness/Contrast setting window | ||
|
|
|
|
Brightness | Set the brightness of the display | ||
| With this function you can change the brightness of the background lighting. | ||
| You can see whether the ECO operating mode is active under the bar for | ||
| displaying the brightness setting. | ||
Contrast | Set the contrast of the display | ||
| With this function you can modify the contrast of pale colours. | ||
|
|
|
|
Black level | Set the brightness of the display | ||
| With this function you modify the contrast of dark colours. | ||
|
| ||
Auto level * | Adjust the signal level | ||
| With this function you can automatically set the contrast. | ||
| The function is executed with the |
| button. |
| SELECT / MENU | ||
|
|
|
|
* function not available in DVI mode
If the contrast is set too high, bright surfaces can no longer be distinguished from very bright surfaces. If the contrast is set too low, the maximum brightness will not be achieved.
18 |
