Important notes
Important notes
In this chapter you will find information regarding safety which it is essential to take note of when working with your device.
Safety instructions
This device complies with the relevant safety regulations for data processing equipment, including electronic office machines for use in an office environment. If you have any questions, contact your sales outlet or our Help Desk.
•The display surface of the device is sensitive to pressure and scratches. You should therefore be careful with the display surface in order to avoid lasting damage (scratches).
•If the device is brought into the installation site from a cold environment, condensation can form. Before operating the device, wait until it is absolutely dry and has reached approximately the same temperature as the installation site.
•When installing and operating the device, please observe the notes on environmental conditions in Chapter "Technical specification", Page 25 as well as the instructions in Chapter "Setting up an ergonomic video workstation", Page 8.
•To ensure sufficient ventilation, the air inlet and outlet openings of the device must be kept clear.
•The device automatically sets itself to the correct voltage within the range from 100 V to 240 V. Make sure that the local mains voltage is neither higher nor lower than this range.
•Ensure that the power socket on the device and the mains outlet are freely accessible.
•The ON/OFF switch does not disconnect the monitor from the mains voltage. To disconnect fully from the mains supply, disconnect the power plug from the socket.
•The device is equipped with a power cable that complies with safety standards.
•Use the supplied power cable only.
•Lay the cables in such a way that they do not create a hazard (danger of tripping) and cannot be damaged. When connecting the device, observe the relevant notes in chapter "Connecting the device", Page 11.
•No data transfer cables should be connected or disconnected during a thunderstorm.
•Make sure that no objects (e.g. jewellery chains, paper clips, etc.) or liquids get inside the device (danger of electric shock, short circuit).
•The device is not waterproof! Never immerse the device in water and protect it from spray water (rain, sea water).
•In emergencies (e.g. damaged casing, elements or cables, penetration of liquids or foreign matter), switch off the device, disconnect the power plug and contact your sales outlet or our Help Desk.
•Repairs to the device must only be performed by qualified technicians. Unauthorised opening and incorrect repair may greatly endanger the user (electric shock, fire risk).
•Only use the screen resolution settings and refresh rates specified in Chapter "Technical specification", Page 25. Otherwise you may damage the device. If you are in any doubt, contact your sales outlet or our Help Desk.
•Use a screen saver with moving images and activate the power management for your monitor to prevent still images from "burning in".
•If you operate the device with the swivel arm or wall bracket, it must not be turned by 180°.
3 |
