![](/images/new-backgrounds/1194832/19483295x1.webp)
Installing the hardware
4.3.2Installing/removing the system unit
VCAUTION!
●Because the PRIMERGY BX900 S1 system unit is large and heavy, at least three people are needed to safely mount it in the rack or remove it from the rack.
●Please observe the safety information and notes on rack installation in the chapter "Important notes" as of page 36.
●Before you install the system unit in the rack, remove the
server blades, power supply units and fan units to reduce the weight of the system unit.
●Only lift or carry the system unit by the handles on the long sides.
●Never lift or carry the system unit by the handles on the front or back.
IFor the japanese market:
Refer to the "Rack Mounting Guide" for more detailed explanation and for other support systems.
ÊMake a note of the positions of the individual server blades and storage blades, the connection blades, power supply units and fan modules in the system unit for reinstallation.
ÊRemove the server blades, storage blades, power supply units, fan units, connection blades and management blades from the system unit. For assembly instructions see chapter
48 | Operating Manual | BX900 S1 |