Fujitsu C-7661, C-6651, C-7651 manual C A U T I O N, Menu Field, Options, Default, Description

M a i n M e n u

Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu

Menu Field	Options		Default	Description
Maximum	n	Display only	–—	Displays the maximum capacity of the drive calculated from the
Capacity:				parameters of the hard disk when Hard Disk is selected.
Multi-Sector	n	Disabled	[16 Sectors]	This option cannot be changed when Auto is selected. Specify the number
Transfers:	n	2 Sectors		of sectors per block for multiple sector transfer. MAX refers to the size the
	n	4 Sectors		disk returns when required.
	n	8 Sectors
	n	16 Sectors
	n	32 Sectors
	n	64 Sectors
	n	128 Sectors
LBA Mode	n	Disabled	[Enabled]	Enables or disables logical Block Addressing in place of Cylinder, Head,
Control:	n	Enabled		Sector addressing. This cannot be changed when Auto is selected.
PIO Transfer	n	Standard	[Fast PI0 4]	Selects the method for moving data to/from the drive. Autotype the drive
Mode:	n	Fast PIO 1		to select the optimum transfer mode. This option cannot be changed
	n	Fast PIO 2		when Auto is selected. Multi-word DMA is automatically set to mode 1 for
	n	Fast PIO 3		Fast PIO 1, Fast PIO 2, Fast PIO 3, and set to mode 2 for Fast PIO 4 /
	n	Fast PIO 4		DMA.
DMA Transfer	n	Disabled	[Ultra DMA 5]	Selects the method for moving data to/from the drive. Autotype the drive
Mode:	n	Multiword DMA 1		to select the optimum transfer mode. This option cannot be changed
	n	Multiword DMA 2		when Auto is selected.
	n	Ultra DMA 0
	n	Ultra DMA 1
	n	Ultra DMA 2
	n	Ultra DMA 3
	n	Ultra DMA 4
	n	Ultra DMA 5

C A U T I O N

A bootable CD-ROM may have a floppy disk format or

ahard drive format. When the bootable CD-ROM is used, the drive allocations change automatically with- out changing the BIOS setup. If a floppy disk format CD-ROM is used, the CD-ROM becomes Drive A. The CD-ROM will only take Drive C: (hard drive format) if the internal hard drive is not present or is disabled. The bootable CD-ROM can never use a C: designation if a formatted internal hard drive is present, since the C: designator is always reserved for the internal hard drive.The boot sequence ignores the new drive designa- tions, but your application software will use the new designations.

C A U T I O N

Be careful of the operating environment when booting from a CD-ROM or you may overwrite files by mistake.

7