CHAPTER 4 REMCS Service Operations
4.1 REMCS Operations Overview
24
C122-E180-01EN
This chapter describes how to operate the REMCS service.
4.1 REMCS Operations Overview
When the REMCS Center registration is completed or cancelled, the window shown in FIGURE 4.1 [REMCS
initial] window appears. This window also appears when you start REMCS through the MMB Web-UI after
the confirmation of connection to the REMCS Center is completed.
Select the function to perform from the menu on the left side of the window shown in FIGURE 4.1 [REMCS
initial] window.
TABLE 4.1 Items in the REMCS initial window shows the menu items in the REMCS initial window.
FIGURE 4.1 [REMCS initial] window
TABLE 4.1 Items in the REMCS initial window
Item
Description
Re-register
Updates the registration information.
Customer Information
update
Confirms or changes the customer information.
For details, see 4.2.1 Customer Information update.
Connection Environment
Displays or changes the connection information.
Periodical Connection
Specifies or changes the periodic connection schedule.
Export Settings
Exports the setting information.
Connection type change
Specifies or changes the connection configuration.
Display of certificate
Displays the certificate used for transmission in S/MIME format.
Replacement of
certificates
Replaces the certificate used for transmission in S/MIME format.
Replacement to the
previous certificate
Replaces the certificate used for transmission in S/MIME format with
the one used earlier.
If a certificate has not been replaced, this item cannot be selected.
Connection check
Checks the connection to the REMCS Center.
Temporary Disconnection
Temporarily disconnects the system from the REMCS Center for cases
such as maintenance.
Reconnection
Re-establishes the connection to the REMCS Center after temporary
disconnection.
HW Config. Info.
Sends the hardware configuration information.
HW Config. Info.
Sends the software configuration information.
Exit
Exits the REMCS operations and closes the browser window.