CHAPTER 5 CHAPTER 5 REMCS Service Detail Settings
5.2 Detail Environment Settings
41
C122-E180-01EN
User ID
64
Required (*1)
Enter user ID of authentication server in
single-byte numeric number and alphabets.
Password
64
Required (*1)
Enter password of authentication server in
single-byte numeric number and alphabets.
Entered values are all displayed as *.
POP settings (When you specify [POP Before SMTP] for [Authentication type])
POP server
128
Required (*2)
Enter the name of POP server or IP address
in single-byte numeric number and
alphabets.
Port No.
5
Required
Enter the port number of the POP3
authentication server in single-byte numeric
characters.
Initial value: 110 (Well Known Port is used.)
Range: 1 to 65535
wait time after POP
authentication
4
Required
Enter the wait time from POP3 authentication
to the start of mail sending (milliseconds) in
single-byte numeric characters.
Recommended value: 1000 ms
Range: 0 to 30000
Connection control
IP version priority
-
Required
Select the priority of IP version from ‘none’,
‘IPv4 (default)’ and ‘IPv6’
Others
Sender E-mail
Address
128
Required
Enter the e-mail address of originator in
single-byte numeric characters and
alphabets.
Large data
transmission method
-
Required
Select dividing method from ‘none’, ‘event
dividing’ (default).
Split size
3
Required (*3)
Enter dividing size in single-byte numeric
characters.
- mail
Default: 64 KB
Range: 10 to 100 KB
- event
Default: 512 KB
Range: 64 to 512 KB
*1: It is required if you select item except for ‘None’ in authentication type.
*2: It is required if you select item except for ‘POP Before SMTP’ in authentication type.
*3: It is required if you select item except for ‘None’ in dividing method.