Fujitsu C122-E180-01EN - page 75

CHAPTER 6 REMCS Messages
6.1 Messages in REMCS Windows
57
C122-E180-01EN
RMG_0009
FE initial frame display completed.
None.
TABLE 6.26 Messages in the [Environment settings] window
Message code
Message
Action
RMG_0001
Failed to get Machine status.(xxx)
\n(MachineID=xxxxxx)
If the error still occurs when
you
retry the operation, exit
and
restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
RMG_0002
Failed to make frame screen data. (xxx)
RMG_0004 Invalid CGI parameter specified.
RMG_0015
Invalid entry.
Correct the entered value.
RMG_0016
Input value is out of range.
RMG_0018 Failed to get registration data.(xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
RMG_0019
Settings of detail environment frame display
completed.
None.
RMG_0021 Failed to register REMCS environment
data.(xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
RMG_0022
Registration of REMCS environment data
completed. None.
None.
RMG_0023
REMCS environment data registration
completed.
RMG_0036
Required entry. Enter a valid value.
Enter a valid value.
RMG_0037
Execute registration of REMCS environment
data. Are you sure?
Click the [OK] or [Cancel]
button.
RMG_0189
All events are not sent to the REMCS Center
until environment setting is completed . Are
you sure?
TABLE 6.27 Messages in the [Selecting REMCS Center] window
Message code
Message
Action
RMG_0002
Failed to make frame screen data. (xxx)
If the error still occurs when
you
retry the operation, exit
and
restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
RMG_0004
Invalid CGI parameter specified.
RMG_0018
Failed to get registration data. (xxx)
RMG_0027
Failed to change Machine status.
RMG_0097 Failed to read connection point list file. (xxx)
RMG_0098
Select REMCS Center frame display
completed. None.
None.
RMG_0099 Failed to change the REMCS Center. (xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
RMG_0100
The Connected REMCS Center change
completed. None.
None.
RMG_0101
Change the REMCS Center address
completed.
RMG_0102
Change the REMCS Center address. Execute
registration again.
Perform registration.
RMG_0103
Change the REMCS Center address. Are you
sure?
Click the [OK] or [Cancel]
button.
RMG_0150
Failed to read setting file. (xxx)
If the error still occurs when
you retry the operation, exit
RMG_0172
Failed to get Destination information. (xxx)