Internal ports and connectors
Graphics port
Technical data |
|
Function: | 2D/3D graphics controller, Dynamic Video memory Technology, 400 Mhz |
| integrated |
Features: | Display Data Channel (DDC), 2 DVO channels (up to 165 megapixels per |
| channel), |
Screen resolution
Depending on the operating system used, the screen resolutions in the following table refer to the mainboard screen controller.
If you are using an external screen controller, you will find details of supported screen resolutions in the operating manual or technical manual supplied with the controller.
Screen resolution | Refresh rate (Hz) | Colour |
640 x 480 | 120 | 32 bit |
800 x 600 | 120 | 32 bit |
1024 x 768 | 120 | 32 bit |
1280 x 1024 | 120 | 32 bit |
1600 x 1200 | 120 | 32 bit |
1920 x 1440 | 85 | 32 bit |
2048 x 1536 | 75 | 32 bit |
Internal ports and connectors
The positions of the internal ports and connectors are shown on the Cover. Additional information on some ports is also provided here.
Hard disk connection
An ultra ATA/66 or ultra ATA/100 hard disk must be connected with a cable especially designed for the ultra ATA/66 or ultra ATA/100 mode.
►Connect the end of the cable marked with blue to the mainboard. A serial ATA/150 hard disk must be connected with a serial ATA cable.
►Connect the cable to the hard disk and to the connector on the mainboard.
If you have connected hard disks to serial ATA (one hard disk is possible per serial ATA connection), you must configure the respective settings in the BIOS Setup (further information you can find in the BIOS Setup manual).
10 - English |
