![](/images/new-backgrounds/1170213/17021357x1.webp)
Add-on modules / Upgrading
Exit
Even when you have run down the device, parts of the device (e.g. memory modules, PCI extension boards) are still energised.
Replacing processor
Technical data
●Intel Pentium 4 with 533 or 800 MHz front side bus in the LGA775 design.
●Celeron with 800 MHz Front Side Bus in the LGA775 design
●A current list of the processors supported by this mainboard is available on the Internet at:
Installing processor with heat sink
! | Never touch the underside of the processor. Even minor soiling such as grease from the | |
skin can impair the processor's operation or destroy the processor. | ||
|
Place the processor in the socket with extreme care, as the spring contacts of the socket are very delicate and must not be bent.
► Remove the heat sink.
2 |
1 |
►Press down the lever (1) and unhook it.
►Fold up the frame.
English - 19 |