Fujitsu FI-4120C2 1.3 Operator Panel, ■Indications on the Function Number display

1.3 Operator Panel

The operator panel is located on the right side of the scanner. This panel comprises of a Function Number display, four buttons and a LED.

		Function No.
		display
		Function
		Send to
		Scan
		Power button
		LED
	Name	Function
Function Number		Indicates the function
display		Number and error status.
Button	Function	Changes the Function acti-
		vated by the Send to button
		(*).
	Send to	Launches the linked appli-
	Scan	cation software (*).
	Power	Turns the scanner ON and
	button	OFF.
LED	-	Lights when the scanner is
		turned ON.

*) About the settings on the launcher, refer to FUJITSU TWAIN32 scanner driver help and the "fi-4120C2 Operator’s Guide" in the Setup CD- ROM.

■Indications on the Function Number display

■8

Blinks only one time upon turning on the scan- ner.

■P

Indicates that the scanner has been turned ON and is being initialized.

■0

Indicates that initialization will soon end.

■1

Indicates that initialization has ended success- fully.

The scanner is now in "Ready Status".

■U

Indicates that a temporary error occurred when documents were being scanned. A number appearing in alternation following the U (i.e., 1 or 2, etc.) refers to the type of error.

To return the scanner to the ready status ("1"), press "Scan" or "Send to" button.

■E

Indicates that a device (hardware) alarm has occurred during scanning of documents. "E" and the alarm Number (2 to 9, c and d) will appear alternately.

To return the scanner to the ready status ("1"), press "Scan" or "Send to" button.

If this alarm occurs, turn the power off and on again. If the alarm continues after turning the power on again, contact your service engineer.

fi-4120C2 Image Scanner Getting Started 2