Fujitsu FI-4120C2 Pick roller bushing, 4.3 Replacing the Pick Roller, fi-4120C2Image Scanner Operator’s Guide, 4.Remove the Pick roller from the scanner

4.3 Replacing the Pick Roller4.Remove the Pick roller from the scanner.

1)Grip the knobs on the sheet guide with your fingers, and lift it up to remove.

2)Rotate the Pick roller bushing in the direction of the arrow.Pick roller bushing3) Remove the Pick roller while lifting it up in the direction of the arrow.

4

CONSUMABLES REPLACING

￿￿￿￿￿￿￿

The Pick roller Bushing is hard. Do not turn this bearing with your fingernails.

Use a paper clip for turning the roller bushing If you can not rotate it with your finger.

fi-4120C2 Image Scanner Operator’s Guide 59