2.3 Setting Imprinter

You must do the following:

1)Click the [Option] button is from the main screen of the scanner driver [TWAIN Driver].

2)Select the [Imprinter(Endosor)] tab. The following screen is displayed.

2

BASIC OPERATIONS

3)Enable Imprinter. Setup the position of printing and the print string.

Refer to "FUJITSU TWAIN32 scanner driver User’s Guide" stored in the scanner driver (CD-ROM) for the details of the setup.

4)Press [OK] button to confirm the setup.

5)Click the [Scan] button is from the main screen of the scanner driver [TWAIN Driver] , the defined data is printed on the document.

HINT

When you want to setup the imprinter without using a scan- ner driver.

Refer to “fi-4860C Operator’s Guide”,the section ” 7.3 Setup Mode Details”

2.3￿Setting Imprinter

9

Page 27
Image 27
Fujitsu FI-486PRRE manual Setting Imprinter, Basic Operations