Fujitsu FI-486PRRE manual Cleaning the Nozzle Surface of the Print Cartridge

Cleaning the Nozzle Surface of the Print Cartridge

Ink or stains stuck to the nozzle surface of the print cartridge or leaving the imprinter unused for a while cause poor printing of characters because of blocked emission holes in the nozzle. If your imprinter has this trouble, clean the nozzle surface of the print cartridge.

ATTENTION

For the cleaning, use dry lint-free cloth and wipe the parts gently. Wipe off dirt and stain gently from the nozzle surface.

1)Remove the Print cartridge.

Refer to the section "4.1 Replacing the Print Cartridge" (page16).

Nozzle surface

2) Gently wipe off dirt and stain from the Nozzle surface using dry lint-free cloth.

3)Make sure that dirt and stain are all removed and then install the cartridge. Refer to the section "2.1 Installing the Print Cartridge" (page6).

14

￿