For FUJITSU ISIS Scanner Driver

■Preparation

ATTENTION

When using Windows NT 4.0, Windows 2000 or Windows XP, log on as a user with "Administrator" privileges.

Confirm the following items before installing the appli- cation.

•Take out the Setup CD-ROM from its pack- age, but do not insert the Setup CD-ROM into the CD driver yet.

•Connect the scanner correctly to your PC.

For details on how to connect the scanner,

HINT

refer to "2.2 Connecting the Scanner to

 

 

Your PC" on page 4.

■Installing the FUJITSU ISIS Scanner Driver

Windows XP screenshots are used in this

HINT

section as examples. The windows and

 

 

operations may vary slightly depending on

 

your OS.

1. Open the hopper.

⇒If the scanner is automatically detected, [Found New Hardware Wizard] or [Add/ Remove Hardware Wizard] dialog box will appear.

4.Click [Cancel] to close the Wizard window.

5.Insert the "Setup CD-ROM" into the CD drive.

⇒<SETUP DISK START UP SCREEN> appears.

Function

 

 

Hopper Height

Thin

Power

Thickness

 

 

Thick

Send to

 

Scan

 

 

ATTENTION

This screen may not appear when the "Autoplay" setting of your CD drive is off. In this case, run "Install.exe" in this CD- ROM directly from "Explorer" or "My Com- puter".

Power button

Hopper

6.Click [INSTALL PRODUCTS] and then click [ISIS Driver].

ATTENTION

Be sure to open the hopper before turning on the power with the Power button.

2.Press the power button to turn the scanner ON.

3.Turn on your PC and log on to Windows.

10