Fujitsu fi-5900C ■Cleaning Materials, Appendix 2 DAILY CARE, ■Cleaning Method, ■Locations and Cycle for Cleaning

Appendix 2 DAILY CARE

During its operation, the inside

￿￿￿￿￿￿￿ glass of the ADF becomes very hot. Before you clean inside the scan- ner, turn off its power and unplug the AC adapter from the outlet. Wait for at least 15 minutes.

Do not turn off the scanner when you clean the Feed rollers or Eject rollers.

■Cleaning Materials

Cleaning	Parts No.	Remarks
Materials
Cleaning sheet	CA99501-	20 sheets/pack
	0016	For the cleaning method,
		refer to "4 Daily Care in
		the fi-5900C Operator"s
		Guide.
Cleaner F1	CA99501-	1 bottle
(or isopropyl	0013	Moisten a cloth with this
alcohol)		fluid and wipe the scan-
		ner to clean.
Cleaner F2	CA99501-	1 bottle
	0014	Moisten a cloth with this
		fluid and clean metal
		rollers only.(Do not use
		for any other parts.)
Cotton swab	Commercially available
Lint-free dry
cloth

For details about the cleaning materials, contact the FUJITSU scanner dealer where you purchased the scan- ner.

■Cleaning Method

The ADF must be cleaned with a lint-free cloth moistened with the Cleaner F1.

The Feed roller must be cleaned with a lint-free cloth moistened with the Cleaner F2.

■Locations and Cycle for Cleaning

	Part to clean		Standard Cleaning Cycle
Pad			Clean these parts after every
				10,000 scans.
Pick rollers
Brake roller
Separator rollers
Feed rollers
Pinch rollers
Transport path
Glass
Skew-detection sensor
Document sensor
ATTENTION		The scanner must be cleaned more fre-
		quently if you scan any of the following

type of sheets:

•Documents of coated paper

•Documents that are almost completely covered with printed text or graphics

•Chemically treated documents such as carbonless paper

•Documents containing a large amount of calcium carbonate

•Documents written with pencil

For details on the cleaning the ADF, refer to "4.Daily Care" in the fi-5900C Operator’s Guide on the Setup CD-ROM".

fi-5900C Image Scanner Getting Started AP-4