Fujitsu fi-60F ■Cleaning Materials, ■ Parts to Clean, AP-3, DAILY CARE, Appendix 2 DAILY CARE, Remarks, Remarks, Parts Number, Part to clean, Cleaning Materials

Appendix 2 DAILY CARE

Do not use any aerosol sprays or alcohol based sprays to clean the scanner.

Dust blown up by strong air from the spray may enter the inside of the scanner. This may cause the scanner to fail or malfunction.

Sparks, caused by static electricity, generated when blowing off dust and dirt from the outside of the scanner may cause a fire.

■Cleaning Materials

Cleaning Materials	Parts Number		Remarks


Cleaner F1	PA03950-0352	(*1)	1 bottle
			Moisten the cloth with this fluid and wipe
			the scanner clean. (*2)

Cleaning Wipe	PA03950-0419		1 pack (24 sheets)
			Pre-moistened with Cleaner F1, Clean-
			ing Wipes are used instead of moistened
			cloths.(*2)

Lint-free dry cloth	Any commercially available cloth

*1) It may take long before the cleaner vaporizes if a large quantity is used. When cleaning the scanner parts, dampen a cloth with modest quantities of the cleaner. In addition, wipe off the cleaner completely with a soft lint-free cloth to leave no residue on the surface of the cleaned parts.

*2) For details about cleaning materials, contact the FUJITSU scanner dealer where you purchased the scanner.

■ Parts to Clean

	Part to clean	Remarks


	Document holding pad	Clean the locations using a soft
		cloth moistened with cleaner F1.
	Document bed	cloth moistened with cleaner F1.
	Document bed