Safety Precautions
The provided "Safety Precautions" document contains important information about the safe use of the scanner. Before using the scanner, make sure to read and understand the information provided in the "Safety Precautions" document.
Symbols Used in This Manual
The following symbols are used in this manual.
SymbolDescription
This symbol alerts operators to an
operation that, if not strictly 
WARNING observed, may result in severe
injury or death.
This symbol alerts operators to an operation that, if not strictly
CAUTION observed, may result in safety hazards to personnel or damage
to equipment.
This symbol alerts particularly important information. Be sure to read this information.
This symbol alerts operators to helpful advice regarding operation.
Removing the Protective Packaging
The scanner comes in a variety of protective packaging. Follow the procedure described below to remove the packaging before using the scanner.
1. Open the stacker, and peel off the tape to remove the protective foam sheet from the ADF.
ADF
Protective
Foam Sheet
and Tape
Stacker
2. Pull the ADF release tab to open the ADF, and pull the tape to remove the protective card.
Protective | ADF Release |
Card and | Tab |
Tape |
|
ADF
Installing the Scanner Software
Bundled Software
The following software is bundled with the scanner.
zTWAIN Driver
Conforms to the TWAIN standard. Used when you operate the scanner using TWAIN- compliant applications.
zISIS Driver
Conforms to the ISIS standard. Used when you operate the scanner using
zSoftware Operation Panel
Configures settings for scanning behavior and consumables management. Installed together with the scanner drivers (TWAIN/ISIS drivers).
zError Recovery Guide
Shows the error status and the action to take when an error occurs. Installed together with the scanner drivers (TWAIN/ISIS drivers).
zImage Processing Software Option (trial)
A software option featuring advanced binarization of scanned images.
zScandAll PRO
A
2