Connecting the Cables

The following describes how to connect the cables between the scanner and your computer.

 

AC Adapter

 

 

AC Cable

 

 

4

4

2

3

 

 

 

 

Power Connector

 

 

2

 

USB Connector

1

 

USB Cable

 

CAUTION

Do not use AC adapters other than the one supplied with this scanner. Doing so may cause damage to the scanner. Manufacturer: Sanken Electric Co., Ltd. Model number: SED80N2-24.0

1. Make sure that the computer is turned off.

2. Connect the USB cable with the USB connector of the scanner and the USB port of the computer.

zBe sure to use the USB cable which comes as an accessory with this scanner.

zWhen connecting to an USB hub, use the first stage USB hub that is closest to the computer. If you use the second or later hub stages, the scanner may not operate correctly.

zIf you connect the scanner with USB 2.0, it is required that the USB port and the hub be compliant with USB

2.0.The scanning speed slows down when you connect the scanner with USB 1.1.

zConnect the USB cable with the side showing the USB mark facing up.

USB mark should face up

3. Connect the AC cable with the AC adapter (hereinafter referred to as "the power cable").

WARNING

Be sure to use the supplied power cable. The following cases may cause electrical shock or malfunction.

zUsing a power cable other than that suppliedzUsing the supplied power cable for other devices

4. Connect the power cable to the power connector of your scanner and to the AC outlet.

When you plug the AC cable into an outlet, the [Power] button of the operator panel on the scanner will flash once. Note that this is an initial diagnosis and not a malfunction.

6