Fujitsu fi-6110 Contact for Inquiries

12. Configure scanner settings such as the resolution and paper size.

zTWAIN/ISIS drivers

Configure scan settings, and then click the [OK] button.

The scanner driver setup dialog box may be displayed again after the [OK] button is clicked. If this occurs, click the [Scan] button in the dialog box.

13. In the [Scan Settings] dialog box, click the [Scan] button.

DThe scanned document images are displayed in the ScandAll PRO window.

When an error occurs in the scanner, the Function Number Display alternates between either "J" or "U" and an "error number" for temporary errors, and either "E", "H" or "L" and an "alarm number" for device errors. If an error occurs, refer to "Chapter 8 Troubleshooting" in the Operator's Guide.

For information about other scanning features, refer to "Chapter 5 Various Ways to Scan" in the Operator's Guide.

Contact for Inquiries

Refer to the contact list on the last page of the "Safety Precautions" document.

8