Manuals / Brands / Computer Equipment / Scanner / Fujitsu / Computer Equipment / Scanner

Fujitsu FI-6670(A) 3Connecting the Cables, ADF type, „fi-6670, „fi-6670A, „fi-6770A, „fi-6750S, 3 „fi-6770

1 26

Download 26 pages, 1.4 Mb

3Connecting the Cables

The following describes how to connect the cables between the scanner and your computer.

The type of the connector for the cable depends on the scanner model you use. Confirm the scanner model and use the correct cable.

ADF type

SCSI ID

fi-6670

USB or SCSI connection

fi-6670A

USB or SCSI connection (when Kofax VRS is used)

SCSI cable

4	USB cable
Flatbed type	3 fi-6770
	3 fi-6770

USB or SCSI connection

fi-6770A

USB or SCSI connection (when Kofax VRS is used)

fi-6750S

USB connection

	4	SCSI ID
	4	USB cable
		USB cable
		1
		SCSI cable

Contents

Installing the Scanner Connecting the Cables Installing the Scanner Software 5 Test-ScanningDocuments Introduction Scanner Models Manuals Trademarks Manufacturer Conventions Symbols Used In This Manual Bescheimigung des Herstellers/ Importeurs International ENERGY STAR® Program Precautions Liability Note Use of Mercury Maintenance Warning Label Safety Information Warning Indications Used In This Manual Unplug the scanner when a trouble occurs Do not disassemble the scanner Do not use aerosol or alcohol sprays near the scanner Do not place the scanner within the reach of small children Do not touch the heated section for a long time Do not install the scanner in direct sunlight Do not try to move or lift the scanner alone Handle documents carefully Do not make the scanner wet while carrying it outside 1Preparation Contents of the Scanner Package Part Names and Functions ■fi-6670/fi-6670A(ADF type) ■fi-6770/fi-6770A/fi-6750S(Flatbed type) ■Model-CommonParts Functions of the Operator Panel ■ADF type ■Flatbed type ■Indications on the Function Number Display 2Installing the Scanner 3)Gently close the Document Cover 4)Change the position of the ADF 4 Attach the Stacker and the ADF Paper Chute to the scanner 3Connecting the Cables Make sure that the computer is turned OFF Open the Cable Cover (ADF type only) Connect the scanner to your computer either with a USB or SCSI cable 5 Close the Cable Cover (ADF type only) Let the cables out from the side slots of the scanner 4Installing the Scanner Software Brief Information on the Bundled Software ■FUJITSU TWAIN 32 [TWAIN Driver] (*1) ■FUJITSU ISIS [ISIS Driver] (*1) ■Software Operation Panel ■Adobe Acrobat 8.1 Standard Installing the Bundled Software Click the [INSTALL (Recommended)] button DThe list of scanners appears Select the scanner model name you will be using. Then, click the [Next] button Install the software, following the on-screeninstructions INSTALL (Custom) Click the [INSTALL (Custom)] button DThe [INSTALL PRODUCTS] screen appears Click the button for the software to be installed Repeat Steps 5 and 6 to install other software program(s) here Installing Adobe Acrobat 5Test-ScanningDocuments 4 Load a sheet into the scanner 1)Load the document on the ADF Paper Chute face down 2)Align the side guides to the width of the document Pull out the Stacker to the length of the document, and then raise the Stopper Launch ScandAll PRO 10Select the [Scan] menu D [Scan Settings] DThe [Scan Settings] dialog box appears 11Clear the [Save to file] checkbox 12Click the [Scanner Setting] button DThe scanner driver’s setting dialog box appears ■Kofax VRS 14In the [Scan Settings] dialog box, click the [Scan] button DThe scanned document images are displayed in the ScandAll PRO window fi-6670(A)/fi-6770(A)/fi-6750SImage Scanner Getting Started