Safety Information
Safety Information
Warning Indications Used In This Manual
The following indications are used in this manual to obviate any
change of accident or damage to you and/or the equipment.
Use the scanner only at the indicated power voltage. Do not connect to
Use the scanner only at the indicated power voltage and current. Improper power voltage or current might cause fire or electric shock. Do not connect to
This indication alerts operators to an operation that, if not strictly observed, may result in severe injury or death.
This indication alerts operators to an operation that, if not strictly observed, may result in safety hazards to personnel or damage to equipment.
A TRIANGLE symbol indicates that special care and attention is required.
The drawing inside the triangle shows the specific caution.
A CIRCLE with a diagonal line inside shows action which users may not perform.
The drawing inside or under the circle shows the specific action that is not allowed.
Outline characters on a colored background show instructions users should follow.
It may also include the drawing that shows the specific instruction.
Do not touch the power plug with wet hands. Doing so might cause electric shock.
Wipe off any dust from the power plug.Wipe off any dust from the metal parts on the power plug or metal fittings with a soft, dry cloth. Accumulated dust might cause fire or electric shock.
Do not install the scanner in a location that has oil smoke, steam, humidity, and dust.
Do not install the scanner in a location subject to oil smoke, steam, humidity, and dust. Doing so might cause a fire or electric shock.
Do not use the scanner if there is a strange odor.If you detect excessive heat coming from the scanner or detect smoke, strange smells or noises during the operation, immediately disconnect the power plug from the Power outlet. Before contacting the store where you bought the scanner or an authorized FUJITSU scanner service provider,
The following are important warnings described in this manual.
Do not damage the Power cable.A damaged Power cable may cause fire or electric shock. Do not place heavy objects on Power cables, or pull, bend, twist, heat, damage or modify Power cables.
Do not use damaged Power cables or power plugs, or install any cables or power plugs to loose wall sockets.
Use only specified Power cables and interface cables.Use only specified Power cables and interface cables. Failure to use the correct cables might cause electric shock and/or equipment failure. Do not use the Power cable provided with the scanner for other devices, since this might cause equipment failure and other troubles or an electric shock.
Make sure to ground the scanner.Make sure to ground to avoid electric shock. Be sure to ground before plugging into a Power outlet. Unplug from the outlet before removing the ground connection.
make sure that any smoke coming from it has completely stopped. Never try fixing such problems by yourself. Doing so is dangerous.
Disconnect the power if the scanner is damaged.If the scanner is damaged for any reason, immediately disconnect the power plug from the Power outlet. Then, contact the store where you bought the scanner or an authorized FUJITSU scanner service provider.
Do not put liquids inside the scanner.Do not insert or drop any metal objects into the ADF slot or ventilation ports on the scanner.
Do not scan any wet documents or documents with paper clips or staples attached.
Do not splash or allow the scanner to get wet. If foreign objects (water, small metal objects, liquids, etc.) get inside the scanner, immediately disconnect the power plug from the Power outlet. Then, contact the store where you bought the scanner or an authorized FUJITSU scanner service provider. Pay particular attention to this warning in households where there are small children.
5