Manuals / Brands / Computer Equipment / Scanner / Fujitsu / Computer Equipment / Scanner

Fujitsu FI-6670(A) ■Kofax VRS, Configure scan settings, and then click the [OK] button, 14In the [Scan Settings] dialog box, click the [Scan] button

1 26

Download 26 pages, 1.4 Mb

5 Test-Scanning Documents

■Kofax VRS

Configure scan settings, and then click the [OK] button.

14In the [Scan Settings] dialog box, click the [Scan] button.DThe scanned document images are displayed in the ScandAll PRO window.

Refer to “Chapter 8 Troubleshooting” in the Operator’s Guide, in case you see a number and an alphabet displayed on the Function Number Display.

For information about other scanning features, refer to “Chapter 5 Various Documents” in the Operator's Guide contained in the SETUP DVD-ROM.

For the fi-6670A or fi-6770A, it is recommended that you perform a scan using Kofax VRS. For about Kofax VRS, refer to the “VirtualRescan (VRS) User’s Guide” (VRS User Guide.pdf) in the folder under the path of \VRS\HVRS\Documents in the SETUP DVD-ROM.

Contents

Installing the Scanner Connecting the Cables Installing the Scanner Software 5 Test-ScanningDocuments Introduction Scanner Models Manuals Trademarks Manufacturer Conventions Symbols Used In This Manual Bescheimigung des Herstellers/ Importeurs International ENERGY STAR® Program Precautions Liability Note Use of Mercury Maintenance Warning Label Safety Information Warning Indications Used In This Manual Unplug the scanner when a trouble occurs Do not disassemble the scanner Do not use aerosol or alcohol sprays near the scanner Do not place the scanner within the reach of small children Do not touch the heated section for a long time Do not install the scanner in direct sunlight Do not try to move or lift the scanner alone Handle documents carefully Do not make the scanner wet while carrying it outside 1Preparation Contents of the Scanner Package Part Names and Functions ■fi-6670/fi-6670A(ADF type) ■fi-6770/fi-6770A/fi-6750S(Flatbed type) ■Model-CommonParts Functions of the Operator Panel ■ADF type ■Flatbed type ■Indications on the Function Number Display 2Installing the Scanner 3)Gently close the Document Cover 4)Change the position of the ADF 4 Attach the Stacker and the ADF Paper Chute to the scanner 3Connecting the Cables Make sure that the computer is turned OFF Open the Cable Cover (ADF type only) Connect the scanner to your computer either with a USB or SCSI cable 5 Close the Cable Cover (ADF type only) Let the cables out from the side slots of the scanner 4Installing the Scanner Software Brief Information on the Bundled Software ■FUJITSU TWAIN 32 [TWAIN Driver] (*1) ■FUJITSU ISIS [ISIS Driver] (*1) ■Software Operation Panel ■Adobe Acrobat 8.1 Standard Installing the Bundled Software Click the [INSTALL (Recommended)] button DThe list of scanners appears Select the scanner model name you will be using. Then, click the [Next] button Install the software, following the on-screeninstructions INSTALL (Custom) Click the [INSTALL (Custom)] button DThe [INSTALL PRODUCTS] screen appears Click the button for the software to be installed Repeat Steps 5 and 6 to install other software program(s) here Installing Adobe Acrobat 5Test-ScanningDocuments 4 Load a sheet into the scanner 1)Load the document on the ADF Paper Chute face down 2)Align the side guides to the width of the document Pull out the Stacker to the length of the document, and then raise the Stopper Launch ScandAll PRO 10Select the [Scan] menu D [Scan Settings] DThe [Scan Settings] dialog box appears 11Clear the [Save to file] checkbox 12Click the [Scanner Setting] button DThe scanner driver’s setting dialog box appears ■Kofax VRS 14In the [Scan Settings] dialog box, click the [Scan] button DThe scanned document images are displayed in the ScandAll PRO window fi-6670(A)/fi-6770(A)/fi-6750SImage Scanner Getting Started