Chapter 3 Installation
3.1Jumper settings of ADA-16FX-ETHERNET
The following jumper settings are set by default:
Jumper | Description / Function | Type | Default |
|
|
|
|
JP1 | Use chip select line 2 | solder JP 2pol. | Closed |
JP2 | Use chip select line 3 | solder JP 2pol. | Open |
JP3 | Use chip select line 4 | solder JP 2pol. | Open |
JP4 | Select center tap A of Ethernet jack | solder JP 3pol. | |
JP5 | Select center tap B of Ethernet jack | solder JP 3pol. |
Please refer to the documentation of the evaluation board for detailed information about the jumper settings for the
© Fujitsu Microelectronics Europe GmbH | - 7 - |
