Fujitsu FP-410 user manual B-3. USB Interface, B-4. Drawer Kick Connector, Type-B Connector 4Pin

B-3. USB Interface

(1) Type-B Connector: 4Pin

Item	Signal Name	I/O direction	Function
1	BUS5V	--	BUS-POWER5V
2	D-inB	In/Out	D-
3	D+inB	In/Out	D+
4	SG1	--	Grand

(2) Type-A Connector: 8Pin

Item	Signal Name	I/O direction	Function
1	USB5V2	Out	+5V for A1
2	D-OUTA2	In/Out	D- for A2
3	D+OUTA2	In/Out	D+ for A3
4	SG1	--	Grand for A4
5	USB5V3	Out	+5V for B1
6	D-OUTA3	In/Out	D- for B2
7	D+OUTA3	In/Out	D+ for B3
8	SG1	--	Grand for B4

Note: The electric power consumption of the device connected with the Type-A connector should be up to 0.1A or less. When the device that exceeds this condition is connected, it would cause the failure of the printer. The USB cable must be a shielded one.

B-4. Drawer Kick Connector

Pin No.		Signal Name		I/O direction	Function
1		DRSNS2		Drawer sense signal 2	Input
2		*DRD1		Drawer kick drive signal 1	Output
3		DRSNS1		Drawer sense signal 1	Input
4		+24V		Drive power	Output
5		*DRD2		Drawer kick drive signal 2	Output
6		SG		Drawer sense ground signal	Output
	1		6

Connecting side

49