Evaluation
MCU
Connected at shipment
MCU board
MCU board
Screws for securing header board
Header board
YQPACK
NQPACK
User system
Figure 5 Connecting MCU Board/Header Board to User System
■Disconnection
1.Remove the MCU board from the header board. Detach the four corners slowly in sequence, not excessively forcing the junction with the NQPACK.
2.Remove all of the four screws from the header board. Pull out the header board vertically from the NQPACK. Remove the header board slowly not excessively forcing the junction with the
NQPACK.
6