Fujitsu LQFP-52P Preface, Caution of the products described in this document, Cuts, Damage

PREFACE

Thank you for purchasing the LQFP-52P (0.65 mm pitch) *1 header board (model number : MB2146-261) for the F2MC *2 -8FX family.

MB2146-261 is a header board used to connect the MCU board (model number : MB2146-301, MB2146-303) which mounts the F2MC-8FX family evaluation MCU to a user system.

This manual explains the handling of the MB2146-261. Before using MB2146-261, be sure to read this manual.

Consult the Sales representatives or the Support representatives of Fujitsu Limited for mass-pro- duced MCUs and evaluation MCUs which correspond on MB2146-261.

MB2146-261 is an object about MCU with a built-in LCD controller.

*1 : The lead pitch of package (FPT-52P-M01) is 0.65 mm and the body size is 10 mm ⋅ 10 mm.

*2 : F2MC is the abbreviation used for FUJITSU Flexible Microcontroller.

■Caution of the products described in this document

The following precautions apply to the product described in this manual.

CAUTION

The wrong use of a device will give an injury and may cause malfunction on cus- tomers system.

Cuts	This product has parts with sharp points that are exposed.
	Do not touch an edge of the product with your bare hands.
	When connecting the header board to the user system, correctly position the index
Damage	mark (▲) on the NQPACK mounted on the user system with the 1 pin direction(1)
	on the header board, otherwise the MCU board and user system might be dam-
	aged.
Damage	When mounting a mass production MCU, correctly position pin 1, otherwise the
	mass production MCU and user system might be damaged.

i