![](/images/new-backgrounds/1328683/32868313x1.webp)
![](/images/new-backgrounds/1328683/32868313xi2.webp)
![](/images/new-backgrounds/1328683/32868313xi3.webp)
Using the Controls
STEP 6
Select Cycle Options
Press the pads to select one or more options.
Extra Rinse
Adds an additional rinse at the end of the cycle to more thoroughly remove laundry additives and perfumes.
Chime
Press the Chime pad to activate audio Power on, start and
Delay Start
Any cycle can be delayed for up to 19 hours in one hour increments.
1.Make the appropriate selections for your load.
2.Press the Delay Start pad until the desired delay time appears in the display.
3.Press the Start/Pause pad. The delay time will start counting down.
4.To cancel a delay, press Start/Pause and reselect the cycle.
Child Lock
The washer controls can be locked to prevent unwanted use by children.
1. Press the Chime and Delay Start pads at the same time for three seconds.
2.The Child Lock light will illuminate.
3.To unlock, press the Chime and Delay Start pads at the same time for three seconds. The Child Lock light will go out.
STEP 7
Start the Washer
To start the washer, press the
Start/Pause Pad.
Changing a Cycle
If an incorrect cycle has been accidentally selected:
1. Press the Start/Pause pad.
2. Turn the Cycle selector dial to the desired cycle.
3.Set the desired options for the cycle.
4.Press the Start/Pause pad. The Wash indicator lights stops flashing and the new cycle starts.
Canceling a Cycle
To cancel a cycle:
1.Press the Power Off pad.
2.Turn the Cycle selector dial to Drain or Spin.
3.Press the Start/Pause pad. The Spin light illuminates and the washer starts the drain or spin.
Cycle Indicator Lights
The Wash, Rinse and Spin lights at the top of the control panel will illuminate progressively to indicate when the washer is in those portions of the cycle.
The Washer light will flash when the cycle has been paused.
6