Troubleshooting• | ||
The washer will not start | • | Make sure door is firmly closed. |
| • Make sure the washer is plugged in. | |
| • Make sure the water source faucet is turned on. | |
| • Make sure to press the Start/Pause pad. | |
| • Make sure the Child Lock is not activated, see page 6. | |
No water or insufficient |
| Turn both faucets on fully. |
water supply | • | Make sure the door is tightly closed. |
| ||
| • Make sure the washer is plugged in. | |
| • | Check fuse or reset circuit breaker. |
| • | Press the Start/Pause pad. |
| • | Straighten water inlet hoses. |
| • | Disconnect hoses and clean screens. Hose filter screens may be plugged. |
| • | Open and close the door, then press the Start/Pause pad. |
|
|
|
Detergent remains in the | • | Make sure the washer is running with sufficient water pressure. |
automatic dispenser after the |
| See Installation Instructions. |
wash cycle is complete | • | Put the detergent in the inner parts of the dispenser |
| ||
|
| (away from outside edges). |
|
|
|
Washer vibrates or is too noisy | • | Make sure the washer is set on a level surface. If the surface is not level, |
|
| adjust the washer feet to level the appliance. |
|
| See Installation Instructions. |
| • | Make sure that the shipping bolts are removed. |
|
| See Installation Instructions. |
| • Make sure the washer is not touching any other object. | |
| • Make sure the laundry load is balanced. | |
|
|
|
Stops | • | Plug cord into live electrical outlet. |
| • | Check fuse or reset circuit breaker. |
| • Close door and push the Start/Pause pad to start the washer. | |
|
| For your safety, the washer will not tumble or spin unless the door is |
|
| closed. |
| • This may be a pause or soak period in the cycle. | |
|
| Wait briefly and it may start. |
| • | Check screens on inlet hoses at the faucets for obstructions. |
|
| Clean screens periodically. |
|
|
|
|
| Continued... |
12
