Fujitsu N6110 Exiting from the Security Menu, Fields, Options and Defaults for the Security Menu

L i f e B o o k N S e r i e s N o t e b o o k B I O S

Table 13: Fields, Options and Defaults for the Security Menu

Menu Field	Options		Default	Description
Supervisor	–—		Clear	A display-only field. Set is displayed when the system supervisor password
Password is:				is set and Clear when it is not.
User Password is:	–—		Clear	A display-only field. Set is displayed when the general user
				password is set, and Clear when it is not.
Set Supervisor	–—		[Enter]	Sets, changes or cancels the Supervisor Password. Supervisor’s Password
Password				may be up to seven characters long and must include only letters or num-
				bers (no symbols). Passwords are NOT case- sensitive. To cancel a pass-
				word press the Enter key instead of entering characters in the Enter New
				Password field and in the Re-enter New Password field. When a Supervi-
				sor Password is set it must be used to access the BIOS setup utility.
Set User Password	–—		[Enter]	This field can only be accessed if the Supervisor Password is set. Sets,
				changes or cancels the User Password. The User Password may be up to
				seven characters long and must include only letters or
				numbers (no symbols). Passwords are NOT case-sensitive. To cancel a
				password press the Enter key instead of entering characters in the Enter
				New Password field and in the Re-enter New Password field. When a
				User Password is set it must be used to access the BIOS setup utility.
Minimum User	–—		[0]	Supervisor can set password length (0 to 8) for user password. User can-
Password Length:				not set a password shorter than the minimum length.
Password on Boot:	■	Disabled	[Disabled]	When set to First Boot, a password (User or Supervisor) is required just
	■	First Boot		once after the Power On Self Test (POST) before the operating system
	■	Every Boot		will be read from a disk. When set to Every Boot, a password (User or
				Supervisor) is required every time after the Power On Self Test (POST)
				before the operating system will be read from a disk. When set to Dis-
				abled no password is required.
On Automatic	■	Disabled	[Disabled]	When set to Disabled, it is not necessary to enter a password to wake up
Wake up:	■	Enabled		from LAN or Real Time Clock (RTC). When Enabled, it is still necessary to
				enter a password after automatic wake-up.
KB Lock on	■	Disabled	[Disabled]	When set to Enabled, the PS/2 mouse and keyboard inputs are locked out
Resume:	■	Enabled		upon Resume from Suspend or Save to Disk mode until you enter the
				password. When set to Disabled no password is required. If no Supervisor
				Password is set, this feature is not available and no password is required.
Boot from	■	All	[All]	When All is selected, booting from removable media is not restricted.
Removable Media:	■	Supervisor only		When Supervisor Only is selected, only the Supervisor (i.e., the user who
				enters Supervisor password), can boot from removable media.
Flash Write:	■	Disabled	[Enabled]	When set to [Disabled], the BIOS Flash memory is write protected.
	■	Enabled
Hard Disk Security:	–—		–—	Configures hard disk security features
Owner	–—		–—	Sets Owner information.
Information:

Exiting from the Security Menu

When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or move to another menu. If you wish to exit from setup utility, press the Esc key to go to the Exit Menu. If you wish to move to another menu, use the cursor keys.

22