Fujitsu N6110 manual Primary Master Submenu of the Main Menu, Auto, To select a primary master

L i f e B o o k N S e r i e s N o t e b o o k B I O S

Primary Master Submenu of the Main Menu

The Primary Master submenu identifies what ATA devices are installed.

PhoenixBIOS Setup Utility

Main

Primary Master [FUJITSU MHV2100AT-(PM)]		Item Specific Help
Type:	[Auto]]	Select Serial ATA/ATAPI
LBA Format		drive installed here.
Total Sectors:	195371568
Maximum Capacity:	100GB	[Auto]
		The BIOS auto-types the
Multi-Sector Transfers:	[16 Sectors]	drive on boot time.
LBA Mode Control:	[Enabled]
Transfer Mode:	[Multiword DMA 2]	[None]
Ultra DMA Mode:	[Disabled]	The drive is disabled.

F1	Help	Select	Item	-/Space	Change	Values
ESC	Exit	Select	Menu	Enter	Select	▲ Sub-Menu

Figure 2. Primary Master Submenu

F9 Setup Defaults

F10 Save and Exit

Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu

Menu Field	Options		Default	Description
Type:	■	Auto	[Auto]	Automatically selects the ATA/ATAPI device type. To change the
	■	None		selection, press the spacebar. Select Auto to have the type automat-
				ically identified by the BIOS at POST. Select None if you don’t want
				to select a primary master.
LBA Format				Logical Block Addressing (LBA)
Total Sectors:	---		---	The total number of sectors on your hard disk
Maximum	---		---	The maximum capacity of your hard disk
Capacity:
Multi-Sector	■	Disabled	[16 Sectors]	This option is automatically selected when Auto is selected.
Transfers:	■	2 Sectors
	■	4 Sectors
	■	8 Sectors
	■	16 Sectors
LBA Mode Control:	■	Disabled	[Enabled]	Indicates whether Logical Block Addressing is enabled or disabled.
	■	Enabled		This option cannot be changed when Auto is selected.

6